The semi-automatic handgun designs of John Moses Browning – Part 1: Up to 1900

It probably wouldn’t be an exaggeration to call John Moses Browning the most influential and prolific firearms designer of the 20th Century despite the fact that he died in 1926. He designed a whole list of immensely popular and long-lived rifles, shotguns, machine guns and even an automatic rifle. However, it is his pistol designs that I want to look at in this series of articles. Browning wasn’t the only gun designer to work on what was known as the self-loading pistol in the late nineteenth century, but his ideas persisted long after those of contemporaries such as Georg Luger and Hugo Borchardt had been forgotten. If you look at virtually any current semi-automatic weapon you will see a method of operation and features that were all originally designed by Browning.

Browning also designed a single revolver, the Colt M1905 New Marine, but it’s his semi-automatic pistols that I’ll be looking at in these articles. Browning’s pistol designs developed incrementally until the Colt 1911 by which time he had introduced all the features which would be used in almost every later semi-automatic pistol. For this reason I will look at Browning’s pistol designs chronologically including highlighting developments and mentioning any currently available replicas. I’ll also provide some brief background on the life and times of this very private man. There’s a lot to cover here, so there will be three separate parts to this article:

Part 1: Up to 1900

Part 2: 1902 – 1908

Part 3: 1910 onwards

Early life

John Moses Browning was born in 1855 in Ogden, Utah as one of his Mormon father’s 22 children. At an early age Browning helped out in the family gunshop in Ogden and by the time that he was fourteen he was designing and building his own firearms. When his father died in 1873, Browning and three of his brothers started their own gunshop where they sold many guns designed by John. However, Browning quickly became frustrated that his long hours in the gunshop left little time for what he enjoyed most – designing new firearms.

A young John Moses Browning

Then, in the early 1880s, a salesman for the Winchester Firearms company visited the shop in Ogden and bought a single-shot rifle designed by Browning. He was so impressed by the rifle that he sent it back to the Winchester home office in Connecticut and recommended that they take a close look at it. The engineers at Winchester agreed and in 1883 offered Browning $8,000 (equivalent to around $200,000 today) for the manufacturing rights for the rifle. Browning used the money to set up his own design shop and over the next twenty years he would design a number of very successful rifles and shotguns that were sold by Winchester.

Browning in his twenties

However, the relationship between Browning and Winchester wasn’t all good news. On a couple of occasions, Winchester purchased designs from Browning but did not produce them. This made good commercial sense to Winchester – it stopped potential competitors from getting their hands on Browning’s designs, but it infuriated the designer. This was compounded when Browning began to design semi-automatic weapons (or self-loading guns as they were then known) around 1893.

It is said that Browning became interested in the concept of designing a self-loading mechanism in 1890 when out hunting with friends. He noticed that, when a rifle was fired, the grass in front of the muzzle bent and he began to wonder whether this wasted muzzle energy could be used to load the next round for firing? Browning went on to use these ideas to design a machine gun (the Colt M1895) and in 1896 he sold the designs for four self-loading pistols to Colt. However, by 1897 none of these designs showed any signs of going into production.  Colt claimed that there simply wasn’t a ready market in America for this type of pistol, but Browning was concerned that they were trying to suppress his designs in order to protect sales of Colt revolvers.

By this time Browning was also unhappy with the commercial relationship he had with Winchester and other American manufacturers. Browning was generally paid a flat fee for the purchase of manufacturing rights for a particular design, regardless of how many guns were subsequently sold by the manufacturer. And in the case of very successful Browning designed models like the Winchester 1895 lever action rifle, that might amount to a million dollars or more. What Browning wanted was a royalty deal where, in addition to a fee for selling the manufacturing rights, he would also receive a small commission payment for every gun sold.

The FN Story

In 1886, while John Moses Browning was still tinkering with self-loading pistol designs in the US, a group of firearm manufacturing companies in the Liege Region of Belgium formed an association called Les Fabricants d’Armes Reunis (United Arms Manufacturers). The area around the town of Herstal had long been a centre for the production of guns and increasing orders from around Europe made it sensible for local companies to stop working against each other and begin to work together. In 1887 the Belgian Government decided that it wanted to replace 150,000 of its military rifles with more modern equipment. The prospect of winning this huge order attracted other companies to join Les Fabricants d’Armes Reunis and to form a new group, Fabrique Nationale d’Armes de Guerre (FN).

The FN manufacturing plant at Herstal was truly vast. This re-touched publicity photograph is from around 1910.

FN won the order for new Belgian army rifles and the association built a state-of-the-art production facility in Herstal. The Belgian order was completed by 1891, and for a short time, things looked good for the new factory. But then, in 1894, FN were sued by Mauser who claimed that the rifles supplied by FN to the Belgian Army infringed the patent of the Spanish Mauser rifle. After protracted and expensive legal action, FN lost the suit and as part of the outcome they found themselves under German control. The Germans who ran the FN factory began to re-direct orders to German arms manufacturers and by 1897, very little arms manufacturing was being done at Herstal. In desperation, FN began to look for other products which they could manufacture in the virtually empty factory. One of the first options they considered was the bicycle, then enjoying huge popularity in Europe.

Inside the FN factory complex, around 1908

To research the possibilities for bicycle manufacture, FN sent their Director of External Affairs, the American-born Hart O. Berg, to America to study bicycle manufacturing techniques. On arriving in the US Berg went first to his home town of Hartford in Connecticut. Now, it happens that Hartford is also the location of the Colt factory and, seemingly entirely by chance, Berg met John Moses Browning who was on one of his frequent visits to Colt. The meeting couldn’t have been more fortuitous for both. Browning was frustrated in his dealings with US manufacturers and FN was desperate for something they could manufacture in their idle Herstal plant. ‘Think of it!’, Browning later told his brother Matthew, ‘a new gun factory with nothing to make! I’ll give them something that will set their wheels in motion.

FN Pistolete Browning/Model 1899

Drawing from the patent application for Le Pistolete Browning

What Browning gave to Berg in June 1897 was the prototype of a small, .32” ACP calibre self-loading pistol. FN tested the prototype and were delighted to find that it was not only relatively simple, it was also extremely reliable in contrast to most other self-loading pistols of the period. In initial tests, 500 rounds were fired without any failure to feed or eject. Despite the fact that they had never manufactured a pistol before, FN were so keen to get their hands on the new design that they agreed to pay Browning not just $2,000 for the manufacturing rights but also a royalty equivalent to around 7% of the cost of every pistol sold. Browning was delighted – this was just what he had been refused by US manufacturers. However, the terms of the contract forbade FN from selling these guns in the US or Canada because of Browning’s previous sale of pistol designs to Colt.

The first version of the new pistol went on sale in Europe in January 1899 as Le Pistolete Browning (The Browning Pistol). Looking back at it from the twenty-first Century, Le Pistolete Browning looks pretty basic. It’s a single action, striker-fired design where the barrel is fixed to the frame and the slide moves under blowback to eject the spent cartridge via an ejection port on the right side of the frame above the grip. Up to seven .32” ACP rounds were held in a drop-out magazine and the not particularly easy to use magazine release catch was a small lever located in the heel of the grip. A manual safety on the left side of the frame blocked the sear and locked the trigger. There was no provision for locking the slide back either for cleaning or when the magazine was empty. Finish was blued steel with black rubber grips though a nickel-plated option was also offered and reinforcing plates were added to either side of the frame, just above the trigger. This pistol was fairly small, with an overall length of just over six inches and a four-inch barrel.

All this sounds pretty conventional now but you have to put it in context and remember that this was not only the first John Moses Browning pistol to make it into production, it was also the first production handgun to feature a moving slide rather than a moving bolt or breech block. If you were so inclined, you could probably make a good argument that modern semi-automatic handgun design started with Le Pistolete Browning.

This pistol was in production for less than three years as it was quickly superceded by the FN Model 1900. However, the heavy slide on Le Pistolete Browning meant that felt recoil was minimal and accuracy was very good and as a result it became immediately popular and more than 15,000 were sold before production ended in 1901. After the release of the FN Model 1900, this pistol became commonly known as the FN Model 1899, though this name wasn’t officially used while it was in production.


As far as I am aware, there are no shooting replicas of the Le Pistolete Browning/FN 1899 of any type in any calibre. Which is probably understandable because this is an odd looking, dumpy and (compared to later Browning designs) ugly little pistol, but it’s a pity because the Le Pistolete Browning is historically very important.

FN Model 1900

In 1899 the Belgian Army were looking for a self-loading pistol to replace existing service revolvers. One of the options they considered was Le Pistolete Browning. They reviewed this pistol in 1899 and delivered their verdict to FN – with a number of fairly minor modifications, Le Pistolete Browning would be suitable for adoption by the Belgian Army. The changes required were that the manual safety was modified so that pushing it up would lock the slide to the rear (though the slide still didn’t lock back automatically when the magazine was empty). A cocking indicator was added in the form of a bar which projected from the top of the slide and blocked the sight view when the pistol was not cocked. Grip plates were thicker, a lanyard ring was added at the base of the grip, ‘Sur’ and ‘Feu’ (On and Fire) markings were added to the manual safety and the frame sideplates were enlarged.

The resulting pistol was adopted by the Belgian Army in 1900 and sold commercially by FN as the FN Model 1900. Originally, FN planned to retain Le Pistolete Browning in their range as a civilian model and sell the Model 1900 as the military model, but the differences between the two were so minimal that they decided that a single version would be sufficient. Le Pistolete Browning was phased out in 1901 and subsequent production concentrated on the Model 1900. The new model proved to be hugely popular and almost three-quarters of a million Model 1900s were sold between 1900 and 1914 when production ended. Despite its official designation, this pistol was also widely referred to as Le Pistolete Browning (The Browning Pistol).

Strangely, the FN M1900 is often claimed to be Browning’s first design for a self-loading pistol, which clearly it isn’t. This is simply a development of the earlier Le Pistolete Browning, and his earliest designs for pistols of this type were those which he sold to Colt in 1896. Incidentally, it was also claimed for many years that an FN Model 1900 was used in the assassination of Archduke Franz Ferdinand of the Austro-Hungarian Empire in 1914, an event which precipitated World War One. This is incorrect – the pistol used in the assassination was an FN Model 1910, another John Moses Browning design which we’ll look at later.


Zip. Nada. Nothing. Just like Le Pistolete Browning, the FN Model 1900 has been comprehensively ignored by replica manufacturers. Which is a great pity. I would certainly be delighted to see a replica of either of these pistols and I believe anyone with an interest in the development of the modern handgun would probably feel the same way.

The Colt Automatic Pistol

Back in the US, Colt watched FN’s commercial success with the Model 1899 and began to wonder whether perhaps there was a potential American market for a self-loading pistol? They had been tinkering with the designs they purchased from Browning in 1896 (including producing a full auto version of one of his pistols which proved impossible to control). In November 1898 a prototype of one of these pistols was submitted to the United States Army Ordnance Department where it was examined and tested along with four other automatic pistols.  However, the testers weren’t impressed, reporting that; “The Board is of the opinion, based upon a careful examination of the Borchardt, the Mannlicher, the Mauser, the Colt, and the Bergmann repeating weapons, that the development of this type of pistol has not yet reached such a stage as to justify its adoption in the place of the revolver for service use…”

Undeterred by this report and encouraged by FN’s European success, Colt continued to refine the new pistol and Browning worked on a new rimless cartridge, the .38” ACP, which it would use. In 1900 the US Army Ordnance Department purchased 100 examples of the new version for additional testing (though Colt were unhappy to discover that at the same time, an order was placed for 1000, 7.65mm Luger pistols). Colt were also interested in pursuing the possibilities of commercial sales and in early 1900 one of the new pistols was sent to the very popular Shooting and Fishing magazine.  The resulting review was generally positive but the author did note that; “…the term automatic pistol does not seem to be the proper term to use in connection with the arm; semi-automatic seems to be correct.” Which, as far as I can tell, is the first use in print of the modern term “semi-automatic” to describe what had previously been known as self-loading pistols. From this point on, any pistol which used a reciprocating slide became generally known as a semi-automatic.

The Colt Automatic Pistol shared many of the design features of the FN 1899/1900, but it did provide some entirely new ideas. This was a much larger pistol at over nine inches in length and it had a six-inch barrel. Unlike the FN it had a conventional hammer rather than an internal striker though it was still single action only. In another change to the FN design  the barrel on the Colt was not fixed to the frame – it was mounted in slots in the frame and moved a short distance to the rear as the slide retracted and the ejection port was in the top right of the slide, not the frame.  The manual safety was also interesting – engaging the safety involved depressing the rear section of the slide, including the rear sight. This meant that it was immediately apparent that the safety was engaged (because the rear sight wasn’t visible) but it was found to be very difficult to disengage the safety while gripping the pistol with one hand. Initial versions had serrations on the rear of the slide, but it was just too easy to inadvertently disengage the sight safety while gripping the slide at the rear and the serrations were quickly moved to the front. The sight safety was discontinued about three-quarters of the way through production of this pistol. There was no way of locking back the slide on this pistol and despite its large size, the drop-out magazine held just seven .38” ACP rounds and the release catch was still a small, awkward to use lever in the base of the grip.

On early versions of the Model 1900 the rear sight had to be pressed down to engage the manual safety

A little over four thousand of these pistols were produced between February 1900 and May 1902 when production ended. Two hundred were sold to the US Army and 250 to the US Navy. The remainder were civilian sales. This pistol has come to be known as the Colt Model 1900 but it was simply known as the Colt Automatic Pistol while it was in production.


Guess what? That’s right, there aren’t any shooting replicas of the Model 1900 of any type in any caliber. And again, that’s a great pity. The Colt Automatic Pistol was the first semi-automatic pistol to be widely used in the US and that alone makes it interesting. Writing about this pistol in 1920, noted firearms commentator Captain H.B. Pollard said: “The adoption of the automatic pistol by a firm of the eminence of the Colt Company practically established the principle.  People no longer looked upon automatics as dangerous experimental toys, but recognized that the principle was a success…” IMHO, and in addition to its historic significance, this is a great looking pistol, the hefty slide would provide strong blowback, the quirky sight safety would be an interesting feature to see on a replica and the six inch barrel should provide plenty of power and accuracy. So please, someone give us a replica of this pistol. Pretty please?

I hope you enjoyed this article. In the next instalment we’ll be looking at more John Moses Browning pistols, this time from the period 1902 – 1908. And don’t worry, in that article there will actually be some replicas to discuss!

Related Posts

The semi-automatic handgun designs of John Moses Browning – Part 2: 1902 – 1908

A short history of handguns from 145,991 B.C. to 2260 A.D.

“All you need for a movie is a girl and a gun”

Luc Besson


Leslie Neilson and friends in Forbidden Planet (1956)

Movies and guns, they just seem to go together. Sometimes brilliantly, sometimes hilariously badly. And it’s even better when movie props designers provide us with a vision of handguns of the future (or even the distant past, sort of). Because these often look a lot like the handguns of the present, with random bits of hardware bits stuck on. While most visual elements of movies set in the future seem to get the sort of attention normally associated with brain surgery, handguns are often rather neglected. We get plausibly futuristic costumes, vehicles and cityscapes but law enforcement and military personnel from the future often seem to be stuck with anachronistic handguns.

So, here’s a look at some movie and television visions of the handguns we’ll be using in a few years. They’re presented chronologically, in the order of the dates in which the various movies are set. Not a comprehensive list of sci-fi movies featuring handguns by any means – just a run through some of the more notable ones from the last forty years or so. Not including Forbidden Planet (pictured above) – I just liked the picture. And the futuristic wooden ladder from the 23rd Century. Incidentally some of the details below contain spoilers, especially for Battlestar Galactica.

Where air or airsoft replicas of these pistols exist, I have provided brief details, but I haven’t included details of the many non-shooting replicas which are available.

145,991 B.C.

Battlestar Galactica (TV series, 2004 – 2009)


The Gun: Colonial Warrior Handgun. OK, so now I have ruined the re-booted Battlestar Galactica TV series for anyone who hasn’t seen it and therefore doesn’t know that it is actually set in the distant past. Sorry. But really, you need to keep up…

Anyway, in Series 1 in 2004, the standard sidearm of colonial forces was the Warrior, an electronically fired, magnetic-assisted .36 magnum calibre handgun which fired a 170 grain, steel-cored bullet at close to 1400fps. Due to concerns about the stopping power of the .36 round, the Warrior also featured a single-shot, under-barrel 10mm rocket launcher as back-up.


The Prop: The basis for this gun is a Smith & Wesson 686 revolver, with a small rocket launcher and other bits and pieces added to make it look a bit different. Not a bad looking pistol, though some folk claimed that it was a bit similar to the LAPD pistol used in Blade Runner. During filming it had to be completely dismantled each time it was re-loaded with blanks, so it was discarded in favour of a new pistol based on the FN Five-Seven in Series 2.

Replicas: Off World Manufacturing Co. (really!) made a 6mm, Super Charge Blaster, which is described as a replica of a weapon “used in a popular science fiction TV Series“. OK, we get it. This appears to be a gas powered, mainly plastic revolver with removable shells, but I don’t think it’s still in production and I have never actually seen one. I don’t know how you load the shells either.


Picture from:

A long time ago in a galaxy far, far away…

Star Wars: A New Hope (1977)

SWHanBThe Gun: BlasTech Industries DL-44 heavy Blaster pistol. Sidearm of Han Solo, the DL-44 is an particle weapon which fires a pulsed bolt of energy. The DL-44 includes some nice features such as a vibration in the grip when there is only enough power left to fire five more shots and a capacitor which allows this relatively small pistol to fire with extreme power.


The Prop: Based on a Mauser C-96, with additions including several parts from the Revell “Visible V-8 Engine” model kit (for example, the semi-circular bits stuck on the left of the magazine housing are piston halves from that kit) and an M19 azimuth telescope. But still, this is just so cool… Or at least it seemed that way back in 1977.

Replicas: I don’t know of any replicas of the DL-44, but there are a number of 4.5mm and 6mm Mauser C-96 (or M712) replicas around from Marushin, KJW and Umarex. All you need is to find a suitable old Revell model kit, and you can make your own. The picture below shows a fan-made conversion of a Marushin C-96.



Blade Runner (1982)


The Gun: M2019 PKD Detective Special.  Unlike most movie guns, very little is known about the LAPD pistol used by Rik Deckard and his fellow Blade-Runners. Even the name was invented by fans after the movie appeared, standing for Pflager-Katsumata series D Blaster, or PK-D (PKD also being, not entirely un-coincidentally the initials of the author of the story on which Blade Runner is based, Philip K. Dick). However, it appears that in just five years, the LAPD will have switched to some form of energy weapon which is capable of firing at least four shots without reloading. The function of the LEDs and double trigger isn’t known. Beyond looking cool of course. When asked for more information about the pistol in an interview, Harrison Ford famously sighed and answered “Fuck, it’s just a movie…“.


The Prop: The PK-D was constructed by combining the grip and parts of the frame of a Charter Arms .44 Special Police Bulldog revolver with the receiver and trigger from a Steyr Mannlicher .222 Model SL rifle and adding some LED lights. A great looking pistol even if it’s not readily apparent how it would actually work.

Replicas: A company called HWS produced a gas powered, 6mm “snub-nose” version of the M2019 for a while which even included working LEDs. I have never seen one, and these appear to be rarer than a very rare thing. Looks very nice, but it’s crying out for some wood grips.



Robocop (1987)


The Gun: Auto 9 pistol. By 2028, it seems that Law enforcement personnel will have reverted to more conventional handguns. The Auto 9 pistol features an extended compensator, semi, full auto and three-round burst modes and has a handy 50 round magazine. It’s also capable of firing a range of different ammunition types including armour-piercing, flechette, high-explosive and even non-lethal rounds which incapacitate rather than kill (though how different types of round are selected from a single magazine isn’t explained).


The Prop: It’s just a Beretta 93R with an extended fore end and compensator, a large magazine and an oversize rear sight. Not a huge amount of imagination here, though it looks interesting. It must have been difficult to twirl something this big round before re-holstering!

Replicas: KSC used to make a gas blowback 6mm version of the Auto 9. With full and semi-auto modes, a 38 round magazine and a length of almost fifteen inches, this was a large and hefty replica. It’s also a good visual replica of the movie prop, but it has been out of production for many years now. If you find one, grab it.



Avatar (2009)


The Gun: SN-9 WASP Revolver. The SN-9 revolver fires up to six 9mm hypervelocity rounds and includes a gyroscopically stabilised aiming system. It includes mounts for a light and an optical sight with infra-red and movement sensing capabilities. It has no hammer tang, so can only be fired in double action. Unusually for a revolver, it is a select fire weapon with two-round burst mode in addition to semi-auto.


The Prop: This is based on a Ruger GP100 .357 Magnum revolver with additional alloy housings used as a barrel shroud and mounted above and below the barrel to represent the sight and flashlight. Yet another revolver from the future. Sigh.

Replicas: None known.


Aliens (1986)


The gun: H&K VP70 pistol. The polymer framed Heckler and Koch VP70 pistol was a pretty futuristic design when it was released in 1970, but who would have guessed that it would still be in use over 200 years later as the principal sidearm of the Colonial Marines? Mind you, the selection process used by the Colonial Marines for the adoption of new weapons must be almost as complex as that operated by the US Army, given that background information for the movie suggests that they have only recently adopted this pistol in 2179.


The prop: This is just a standard Heckler & Koch VP70. No modifications, no nothing. Which is either a testament to how futuristic it looked in 1986 or a guide to how little effort the props guys put into this one. Or perhaps they had just spent too much time and effort designing the very wonderful M41A Pulse Rifle?

Replicas: LS Works and UHC produced 6mm, gas blowback replicas of the VP70. Both are pretty decent visual replicas (and the UHC version includes a detachable stock) but neither are particularly great shooters and I’m not certain if either is still in production.


LS Works VP70


Star Trek: The Original Series (1966 – 1969)


The Gun: Hand Phaser. By 2260, personnel of the United Federation of planets will be using a directed energy weapon. The Phaser uses plasma, passed through a phaser emitter to produce a directed beam of Nadion particles. The beam can be widened or narrowed by the user and can be set to stun, kill or disintegrate living creatures though it can also be set to perform other useful tasks including cutting through inert material such as metal and rock.


Not many people realise that in addition to “Stun” and “Disintegrate“, the Federation Phaser pistol also has a “Personal Grooming” setting which allows it to be used for the removal of excess nose-hair. Here, an understandably nervous Captain James T. Kirk is about to demonstrate the correct procedure…

The Prop: Now, that’s more like it! The Phaser doesn’t look anything like a conventional firearm, but it’s recognisably a hand-held weapon. And it still looks really cool! How come a television prop from the 1960s manages to do what so many bigger budget productions have failed to manage since?

Replicas: None known. Shame!


Firefly (2002 – 2003)


The Gun: Moses Brothers Self-Defense Engine Frontier Model B. Five hundred years on and handguns will have reverted to a more conventional look. The weapon carried by Captain Malcolm Reynolds in Firefly was also his sidearm during the Unification war. It’s one of a series of handguns produced by Moses Brothers and functions both as a Gauss/Collgun energy weapon and a conventional semi-automatic firearm. It fires Gaus Quadload ammunition powered by a hefty battery inside the grip, but can be switched instantly to fire using a conventional hammer based cartridge system.


The Prop: This is a Taurus Model 85 revolver almost completely covered in a brass casing which makes it look rather different. Despite looking a lot like a revolver, it is claimed to be a semi-auto pistol as well as an energy weapon. The appearance of this pistol deliberately references the Volcanic Repeating pistol used in the US Civil War, supporting the many echoes of the Wild West/Post Civil War America in the series.

Replicas: None known.


So, there you are, almost 150,000 years of handgun development and they’ll still end up looking a lot like elderly revolvers. Probably. Movies provide striking and memorable visions of the future, but when you look at the Hollywood and television vision of handguns of the future (or technically the past, but it’s still basically the future, OK?), the most striking thing is the lack of imagination displayed. Most prop handguns are recognisably existing guns with bits and pieces stuck on to make them look “futuristic“. Han Solo’s iconic blaster pistol may look cool, but it’s still just a Mauser C96 with some bits of an old Revel kit stuck on it. The LAPD pistol in Blade Runner is parts of a rifle and a pistol joined together with no thought as to how it might actually work. The pistol in Aliens is simply an H&K VP70 with no effort to make it look different at all. And how many other movies set in the future have you seen where Glocks, 1911s and versions of the Beretta 92/93 are the main handguns used?

Does this really matter other than to gun nerds? I’d suggest that it does. If you are trying to depict the future, the artefacts and hardware are an intrinsic part of the way in which characters behave and interact. Of all the movie handguns here, only the Phaser from Star Trek and perhaps the WASP revolver from Avatar try to represent something genuinely different. The Phaser doesn’t resemble any existing firearm and with its ability to be used in a non-lethal mode, reflects nicely the ethos of the Federation. The very lethal caseless sabot ammunition proposed in Avatar suggests that someone actually thought about how weapons might have changed in one hundred and forty years time (though I’m still not convinced about burst mode in a revolver). When you look at how handguns have changed even in the last forty years, it does seem likely that in one or two hundred years, pistols may look and function very differently indeed and that may affect how law enforcement and military personnel behave. So, come on guys, if you’re going to show us a handgun from the future, what about a bit of thought and originality?


Please take a moment to complete the Pistol Place survey to let me know what you like (and don’t like) on the site.  Thanks.

Related pages:

The five best gun movies

Replicas in movies and television